EMF Harmonizing Technologies
Conscious Technologies LLC has created EMF Harmonizing Technologies for cell phones, laptops, tablets, wifi routers, as well as a whole house unit that will harmonize the EMF's in an entire house.
​
The cell phone harmonizers use a blend of 9 composite materials and laptop trays 7. The composite material is made up of a proprietary blend of materials that effectively change the man-made information signal of the device. Not all EMF signals are considered bad. For example the human heart gives off an EMF signal. The difference is man-made EMF has a left handed spin field while things that are in nature and considered healthy are predominately right handed spin. We use information field technology with built in geometries coupled with the specific materials that make up the composite material to change the spin field / information field of the man-made EMF to one that is harmonious. It is important to note that our technology is not designed to block the signal but rather transform it. For more on information field technologies you can see this video.
​
Detailed information about each product can be found on the "Shop" page.
CELL PHONE EMF HARMONIZERS:
This piece of technology was designed using specific materials to harmonize and transmute the EMF cell phone signal. The composite material is a matrix of 9 specific materials and geometries that are designed not to block the EMF signal but rather change the spin field (information field) to something harmonious. It can be placed in a variety of locations either directly on the phone itself or phone case.
​
Size: 2” diameter for Circular Cell Harmonizers and 3-1/2" x2" for Rectangular Cell Harmonizers
(3/16” thick)
Weighs: Only 0.5oz
Attaches via adhesive backing (peel and stick)
​
​
Can the Cell Phone Harmonizer be used on a regular house phone?
Yes, in addition to a cell phone it can also be used on a land line, router and mobile hotpot.
What are the Phone Harmonizers made of?
The phone harmonizers are made of a proprietary composite we have developed that is made up of specific components that are cast using an eco non-toxic resin. Although we do not disclose the contents of our phone harmonizers we will say that they do contain elite shungite and silver along with some very important other ingredients.
​
Where do I place the Cell Phone Harmonizer on my phone?
Although the location for the Cell Harmonizer on the back of your phone or phone case does not matter for its function, it can interfere with other parts of your phones function if the following steps are not followed.
-
Most people like to place the Cell Harmonizer in the middle of their phone. Note for wireless charging station users - the center generally does not work, so choose the top or bottom.
-
We highly recommend that before you adhere it briefly try various placement options to find the best one for you. Before pealing off the paper backing which reveals the self-adhesive backing - use a rubber band to temporary hold the Cell Harmonizer in place and experiment with different placements to figure out where it would work best for you before installing it.
-
Make sure you do not block your cell phone camera lens, speaker, or wireless charging station port. Note how cell phone with Cell Harmonizer fits in a car cell phone holder.
-
Once you find the perfect place remove the paper backing and adhere in place. You get one shot to adhere it, so take your time and be sure you are happy with the spot you chose.
​
Can I remove my Cell Phone Harmonizer?
The Cell Harmonizer has permanent adhesive on the back, however if carefully done it can be removed and reused. Care has to be taken when removing and and you are doing so at your own risk as it could potentially damage your phone or phone case. Conscious Technologies LLC is not responsible for any damage to your phone, case, or the Cell Harmonizer, should you choose to remove it. If you decide to chance it, the safest recommendation is to wear a pair of work gloves and using a putty knife and carefully slide the putty knife under the Cell Harmonizer. It is best to slowly work it under the Cell Harmonizer and avoid a prying motion as that is how it can damage your phone or case by excessive prying.
​
Can an EMF or Trifield Meter Measure the reduction of the EMF’s?
No, we are not blocking the EMF we are transmuting the EMF to something harmonious. If you block the EMF your phone will not be able to send or receive calls. If you inhibit the signal your phone just emits a greater signal to compensate for the poor connection. Our technology is totally different in that it changes the man-made EMF spin field (information field) to something that is in greater resonance with people.
Is there Test Data validating the Cell Phone Harmonizers?
Yes, please visit our Test Data page to see the Thermography testing, kinesiology testing and testimonials.
​
Are there any lectures on Information Fields?
In this lecture segment, given by scientist Marc Newkirk, he explains information field technology. (click to watch)
LAPTOP EMF HARMONIZERS:
The materials used for the Laptop Harmonizer Trays are specifically designed to harmonize the man-made EMF signal that is both given off and received by your device. The tray is comprised of 7 different key materials and goes through a 4 layer process that takes a week to cure so you will see different layers and swirls in the composite material that your tray is made of.
Size: 12” x just under 16.5” (0.5” thick)
Style: Offered in frameless -or- with wood frame
Weight: Each Style Weighs just over 4lbs.
​
​
What are the laptop trays made of?
The laptop trays are made of a proprietary composite we have developed that is made up of 7 specific components and cast using an eco non-toxic resin. It is a time consuming process consisting of 4 layers that takes nearly a week of cure time to make a tray. Although we do not disclose the contents of our trays we will say that they do contain elite shungite and pure silver along with some very important other key ingredients!
Why are they so heavy?
They are a bit on the heavy side but harmonizing the EMF signal was our primary goal and the amount of quality ingredients needed to do that resulted in a tray that had some weight to it. The laptop trays weigh 4lbs 6ozs.
Can an EMF or Trifield Meter Measure the reduction of the EMF’s?
No, we are not blocking the EMF, we are transmuting the EMF to something harmonious. If you block the EMF your phone will not be able to send or receive calls. If you inhibit the signal your phone just emits a greater signal to compensate for the poor connection and ends up creating even more EMF. Our technology is totally different in that it changes the man-made EMF spin field (information field) to something that is in greater resonance with people. For a more in-depth understanding on Information Fields please watch https://youtu.be/xATi6MZpHhw
How should I care for my laptop tray?
Since we use non-toxic eco epoxy it is great for the environment but does not like to be in direct sunlight for long or left in extreme heat such as in a car. It is best to use it inside your house or in the shade otherwise the tray may warp and temporarily become soft.
If the tray is ever left out in the sun the best thing to do is avoid bending it and bring it indoors and lay it on a flat surface. In a short time the tray will rigidize again.
How do I use the laptop tray?
The laptop tray can be used directly on your lap or on a table. If yours has a felt bottom it was intended as the bottom to keep from scratching any furniture, but actually the orientation really does not matter.
These trays change the spin field and harmonize the EMF signal, they do not block it. If you blocked the EMF your device would not be able to connect to Wifi and send and receive signals. Our technology is designed to change the signal to one that is harmonious. Testing the trays with an EMF meter or trifield meter will show that the tray does not block the EMF and that is in fact correct. The materials used do not block EMF but transforms the spin field. This technology is all based in information field technology.
Are there any lectures on Information Fields?
In this lecture segment, given by scientist Marc Newkirk, he explains information field technology. (click to watch)
TABLET EMF HARMONIZERS:
The materials used for the Tablet Harmonizer rays are specifically designed to harmonize the man-made EMF signal that is both given off and received by your device. The tray is comprised of 7 different key materials and goes through a 4 layer process that takes a week to cure so you will see different layers and swirls in the composite material that your tray is made of.
The Tablet Harmonizing Tray comes with an optional L-bracket. Depending on your usage and needs this L-bracket can be attached to the face of the tablet tray giving it a lip for your tablet to rest on when the tray is tilted in your lap. Some people choose to use the L-bracket and some people choose not to.
Size: 8” x 11” (0.5” thick)
Style: Offered in frameless -or- with wood frame
Weight: Each Style Weighs just over 4lbs.
Includes: Optional L-brackets
​
​
What are the tablet trays made of?
The tablet trays are made of a proprietary composite we have developed that is made up of 7 specific components and cast using an eco non-toxic resin. It is a time consuming process consisting of 4 layers that takes nearly a week of cure time to make a tray. Although we do not disclose the contents of our trays we will say that they do contain elite shungite and pure silver along with some very important other key ingredients!
Why are they so heavy?
They are a bit on the heavy side but harmonizing the EMF signal was our primary goal and the amount of quality ingredients needed to do that resulted in a tray that had some weight to it. The tablet trays weigh 1lb 13ozs.
Can an EMF or Trifled Meter Measure the reduction of the EMF’s?
No, we are not blocking the EMF, we are transmuting the EMF to something harmonious. Our technology is totally different in that it changes the man-made EMF spin field (information field) to something that is in greater resonance with people. For a more in-depth understanding on Information Fields please watch https://youtu.be/xATi6MZpHhw
How should I care for my tablet tray?
Since we use non-toxic eco epoxy it is great for the environment but does not like to be in direct sunlight for long or left in extreme heat such as in a car. It is best to use it inside your house or in the shade otherwise the tray may warp and temporarily become soft.
If the tray is ever left out in the sun the best thing to do is avoid bending it and bring it indoors and lay it on a flat surface. In a short time the tray will rigidize again.
How do I use the tablet tray?
The tablet tray can be used directly on your lap or on a table. If yours has a felt bottom it was intended as the bottom to keep from scratching any furniture, but actually the orientation really does not matter.
These trays change the spin field and harmonize the EMF signal, they do not block it. If you blocked the EMF your device would not be able to connect to Wifi and send and receive signals. Our technology is designed to change the signal to one that is harmonious. Testing the trays with an EMF meter or trifield meter will show that the tray does not block the EMF and that is in fact correct. The materials used do not block EMF but transforms the spin field. This technology is all based in information field technology.
Are there any lectures on Information Fields?
In this lecture segment, given by scientist Marc Newkirk, he explains information field technology. (click to watch)
HOUSE SIGNAL EMF HARMONIZER:
The Signal Harmonizer was designed to help harmonize the signals that are found within a home. Whether it be “dirty electricity,” WiFi signals, radio signals, cell phone signals and so forth the Signal Harmonizer was designed to help change the spin field of the man made EMF signals to something much more harmonious. This is done through the use of coherent information fields. This technology is a combination of specific materials, geometries, programming, electrical and non-electrical components that are design to aid in harmonizing ones environment.
​
Size: Large box 9.5” x 9.5” x 9”
Size: Small boxes 3.8” x 3.8” x 3.25”
Does the Signal Harmonizer need power to run?
Yes, but it uses very little power as it only cycles on and off a few times each hour. It cost a cent or two a day to run.
If I loose power will the Signal Harmonizer still work?
It will still work to some extent as it creates an information field inherent by both the materials, programming and geometries that are within the Signal Harmonizer.
How do I install the Signal Harmonizer?
The main power box should be place roughly in the center of your house. The included 8 satellite units get placed at far ends of the house. In a typical two story house with a basement that would mean 4 in the basement far corners (mounted in upper corners of the wall) and 4 on the second floor far corners (set on the floor) in the 4 far corners.
How far away can a satellite unit be from the main power box?
The Satellite unit should be positioned so it is no more than 40’ from the main power box.
What is the radius of the Signal Harmonizer?
Each satellite unit covers a 80’ diameter. If you had a 2 story house with basement you could cover a house that was
How do I operate the Signal Harmonizer?
Simple, flip a switch and leave it on. The signal harmonizer cycles on briefly several times each hour. A small micro-switch can be heard a few times an hour so if that is bothersome you can always place the main power box in a closet or room that is not used as much.
Is there any test data on the Signal Harmonizer?
Yes, we have GDV test data available (click here for test data)
Are there any lectures on Information Fields?
In this lecture segment, given by scientist Marc Newkirk, he explains information field technology. (click to watch)